| Application: | Topographic Survey |
|---|---|
| Product Name: | Kolida K5PRO |
| Function: | Imu |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
PRODUCT DESCRIPTION
KEY FEATURES
More Advanced GNSS Positioning Engine
Featuring a powerful 555 channels GNSS mainboard inside, K5 IMU can track and process all the existed satellite constellations. With the utility of BEIDOU (COMPASS) signal, the data acquisition speed and GNSS signal stability are greatly improved from old generation technology.
Inertial Measurement, a Technology that Greatly Improves Efficiency
The latest inertial measurement technology is onboard with K5 IMU. The tilt survey is no more affected by the earth's magnetic field and requires no correction. It can be activated and start working within only few seconds. With a maximum tilt angle of 60°, there is no need for centering, this fast positioning will increase measurement speed by 20% or even more. The combination algorithm of IMU + GNSS can get fixed solution faster and keep measurement results more stable.
New Radio Link, Improved Functions and Higher Performance
SDL-400 built-in radio can send signal as far as 7km in urban area and 8km in suburb. The maximum coverage area is up to 200 sq.km. It also features anti-interference capability, so K5 IMU can work close to interference source. The next upgrade will increase the communication channels from 8 to 120, to improve the signal transmition quality to a new level. Meanwhile, K5 IMU will support more radio protocol such as Satel, CHC, ZHD, user will have more flexibility to organize the working team and equipment according to mission demand.
PRODUCT SHOW
|
Survering Performance |
|
|
Channel |
555 Channels |
|
Signal Tracking
|
BDS B1, B2, B3 |
|
GPS L1C/A, L1C, L2C, L2E, L2P, L5 |
|
|
GLONASS L1C/A, L1P, L2C/A, L2P, L3 |
|
| QZSS L1C/A, SAIF, L1C, L2C, L5, LEX | |
|
SBAS L1C/A, L5(Just for the satellites supporting L5) |
|
| EGNOS, WAAS, MSAS, GANAN | |
|
Galileo GOIVE-A, GOIVE-B, E1, E5A, E5B, E5AltBOC, E6 |
|
|
GNSS features |
Positioning output rate: 1Hz~50Hz |
|
|
Initialization time: <10s |
|
|
Initialization reliability: >99.99% |
|
Positioning Precision |
|
|
Code differential GNSS Positioning |
Horization: ± 0.25m + 1ppm |
|
|
Vertical: ± 0.5m + 1ppm |
|
|
SBAS positioning accuracy: typically<5m 3DRMS |
|
Static GNSS Surveying |
Horization : ± 3 mm + 0. 1ppm |
|
|
Vertical: ± 3.5 mm + 0.4 ppm |
|
Real-Time Kinematic Surveying |
Horization: ± 8 mm + 1 ppm |
|
|
Vertical: ± 15 mm + 0.5ppm |
|
Network RTK |
Horization: ± 8 mm + 0.5 ppm |
|
|
Vertical: ± 15 mm + 0.5 ppm |
|
RTK initialization time |
2~8s |
|
User Interaction |
|
|
Operating system |
Linux |
|
Buttons |
Two button operation |
|
Indicators |
Five LED indicators lights |
|
Web UI |
Freely to configure and monitor the receiver by accessing to the |
|
Voice guide |
iVoice intelligent voice technology provides status and voice guide |
|
|
Supporting Chinese,English,Korean,Russian,Portuguese,Spanish, |
|
Secondary development |
Providing secondary development package |
|
Hardware performance |
|
|
Dimension |
175×175×83 (mm) |
|
Weight |
1.33kg(including installed battery) |
|
Material |
Magnesium aluminum alloy shell |
|
Operating |
-45ºC~+65ºC |
|
Storage |
-55ºC~+85ºC |
|
Humidity |
100% Non-condensing |
|
Waterproof/Dustproof |
IP67 standard,protected from long time immersion to depth of 1m |
|
|
IP67 standard,fully protected against blowing dust |
|
Shock and Vibration |
Withstand 3 meters pole drop onto the cement ground naturally |
|
Power Supply |
9-25V DC, overvoltage protection |
|
Battery |
Rechargeable,removable Lithium-ion battery,7.4V; standard four batteries power package(optional) |
|
Battery Life |
Single battery: > 7h(static mode) |
|
|
> 5h(internal UHF base mode) |
|
|
> 6h(rover mode) |
|
Communications and Data Storage |
|
|
I/O Port |
5PIN LEMO external power port + RS232 |
|
|
7PIN external USB (OTG) + Ethernet |
|
|
1 radio antenna interface, SIM card solt |
|
Wireless Modem |
Built-in radio, 1W/2W/3W switchable,typical work range can be 8KM |
|
|
Raido and internet repater switchable |
|
Frequency range |
410-470MHZ |
|
Communication protocol |
Trim Talk450s,TrimMark3,PCC EOT,SOUTH |
|
Cellular Mobile Network |
WCDMA/CDMA2000/TDD-LTE/FDD-LTE 4G network modem, downward compatible with 3G GPRS/EDGE |
|
Double Module Bluetooth |
BLEBluetooth 4.0 standard,support for android,ios cellphone connection |
|
NFC Communication (Optional) |
Realizing close range(shorter than 10cm)automatic pair between receiver and controller(controller equipped NFC wireless communication module needed) |
|
External Devices |
Optional external GPRS/EDGE dual-mode communication module, switchable; allow to connect external WLAN card |
|
WIFI |
|
|
Standard |
802.11 b/g standard |
|
WIFI Hotspot |
The WIFI hotspot allows any mobile terminal to connect and access to the internal webserver for the control and moditor receiver |
|
WIFI data link |
To work as the datalink that receiver is able to broadcast and receive differential data via WIFI |
|
Data Storage/Transmission |
|
|
Data Storage |
8GB SSD internal storage |
|
|
Support external USB storage and automatical cycle storage |
|
|
Changeable record interval, up to 50Hz raw data download |
|
Data Transmission |
USB data transmission, supporting FTP/HTTP data download |
|
Data Format |
Differential data format: CMR+, CMRx, RTCM2.1, RTCM2.3, RTCM3.0, |
|
|
GPS output data format : NMEA 0183, PJK plane coordinates, Binary code, Trimble GSOF |
|
|
Network model support: VRS, FKP, MAC, fully support NTRIP protcol |
|
Inertial sensing system |
|
|
Tilt Survey |
Built-in tilt compensator, correcting coordinates automatically according to the tilt direction and angle of the centering rod |
|
Electronic bubble |
Controller software display electronic bubble, checking leveling status of the centering rod real time |
|
Thermometer |
Bulit-in themomter sensors, adopting intelligent temperature control technology which can mornitor and adjust the temperature of receiver in real time |
PACKING & SHIPPING
PAYMENT
COMPANY INFORMETION
Shanghai Hexin Survey Instrument Co., LTD has 8 years' experience in geodetic surveying and cadastration surveying, we are a professional and leading enterprise in the surveying industry in MainlandChina. We specialize in the R&D and manufacturing and sales of all kinds of surveying products, including total station, electronic theodolite, electronic distance meter, automatic level, laser level, reflector prism, surveying accessory, GPS receiver, mapping software, etc.The marketing model advocated by us is not a simple sense of "selling products", instead, pre-sales service, services during operation and after-sales service are integrated in entire operating activities. It makes the customers feel that they purchased not only a commodity, but also a professional service.We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!
FAQ
Q:How to turn off voice broadcast of receiver?
A: a. Enter the WEBUI, find the voice switch in the settings page and turn it off.
b. Controller Software→Device→Device Setting, turn off the "enable voice", and click"ok"
Q: Can the base station and rover station be interchangeable?
A: The difference between the rover station and the base station is that the accessories are different, the function and hardware configuration are the same.You can use the controller to choose the working mode of the device and set it as the base station or rover station.
Q: What is CORS?
A: CORS is called a continuous operating reference station system. It can be understood as a bas e station that is erected at a fixed known point and works continuously for 24 hours and sends its own data to a specific serverthrough the network. The use of CORS operation eliminates the need for a base station, and CORS is equivalent to a base station in a normal network operation.
){kind=link}